Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
builds:vero:ibanez_mostortion [2020/01/15 21:42] jeremybuilds:vero:ibanez_mostortion [2020/01/15 21:50] jeremy
Line 3: Line 3:
  
 The challenge is to get hold of the original CA3260E opamp but the CA3260EZ will do too, you can get those from [[https://nl.rs-online.com/web/p/op-amps/9215393/|RS Components]]. If you really want the orginal you can try your luck on eBay or get the CA3260T [[https://budgetronics.eu/index.php?item=&action=article&group_id=&aid=11084&lang=nl|Budgetronics]] is still offering. Those are CA3260E's in a TO-5 metal can package, looks pretty cool too. The challenge is to get hold of the original CA3260E opamp but the CA3260EZ will do too, you can get those from [[https://nl.rs-online.com/web/p/op-amps/9215393/|RS Components]]. If you really want the orginal you can try your luck on eBay or get the CA3260T [[https://budgetronics.eu/index.php?item=&action=article&group_id=&aid=11084&lang=nl|Budgetronics]] is still offering. Those are CA3260E's in a TO-5 metal can package, looks pretty cool too.
 +
 +Built the vero layout of [[https://dirtboxlayouts.blogspot.com/2019/06/ibanez-mt-10-mostortion.html|Dirtbox Layouts]] which is a buffered layout.
 +
 +{{gallery> :builds:vero:ibanez_mt_10_mostortion.png?lightbox&300x400 }}
  
 Faced the same issue as with the [[builds:vero:felis_fusor|Felis Fusor]], the vero board was too wide so I had to remove a row on both sides. So the wiring looks crappy again. Also with five pots it's hard to tidy up the wiring so the board ended up pretty high and I had to bend some of the electrolytics. Maybe I should try to put three pots on top but I'd prefer to stick with the original setup because that's what I'm used to. Also maybe add an extra bottom row or use a smaller 1µF cap. Faced the same issue as with the [[builds:vero:felis_fusor|Felis Fusor]], the vero board was too wide so I had to remove a row on both sides. So the wiring looks crappy again. Also with five pots it's hard to tidy up the wiring so the board ended up pretty high and I had to bend some of the electrolytics. Maybe I should try to put three pots on top but I'd prefer to stick with the original setup because that's what I'm used to. Also maybe add an extra bottom row or use a smaller 1µF cap.